The mould shop and the machine shop are the same building at Nellikuppam. That is why a new SKU is a drawing and a lead time rather than a purchase order to an outside toolmaker, and why stages three and four below overlap instead of queueing.
Send the container drawing, or post us a sample bottle. We confirm the neck finish, the bottle weight and the preform it will be blown from.
Cavity count fixed against the output you need, container range checked against your largest SKU. Air, chilled water and drying sized in the same pass.
The cavity set is designed and cut in our own mould shop for your drawing and the Krivents clamp, rather than ordered in.
Frame, clamp, heating section, servo drives and panel built and assembled at Nellikuppam, with build records held against the machine number.
The machine is run on test at Nellikuppam with your own mould and preform so the bottle is proved before it ships. You are welcome to witness the trial.
Our team erects the machines at your plant — positioned, levelled, aligned to the line, and connected to the compressed air, chilled water and power you have brought to the point.
The line is brought up stage by stage, the heating profile tuned to your preform, the first bottles blown and checked, and your operators trained on changeover and daily checks before we hand over.
Spares held at Nellikuppam, maintenance contracts written to your running hours, and breakdown support from an hour down the GST road.
A machine is only as reliable as the components it was built from, and the ones that matter are the ones you will have to source again.
PLC and HMI. Spares and service engineers are available in every industrial town in India, not only from us.
PLC and HMI as an alternative build, where your plant already standardises on Mitsubishi.
Valves and cylinders through the clamp, stretch and transfer — the parts that cycle every few seconds for a machine’s whole life.
Krivents operates a certified quality management system. Build records, inspection and test results are held against every machine we despatch, so a question about a machine three years from now has an answer on file.
Drag, scroll or use the arrows · tap any photograph to enlarge